Stud welding with the Pegasar 500 Accu can be performed in a few simple steps. The video is intended to support you during installation.
The video shows you the following steps:
- Preparation / Installation
- Insert the battery into the device
Insert the battery in the correct position (left: double groove, right: groove). Push the battery into the battery case up to the stop.
When delivered with inserted battery, a transport protection separates the contacts between the stud welder and the battery. Carefully remove the transport protection and store it. - Connect the ground cable
Plug the ground cable into the matching plug connection of the stud welder. Press the plug and turn it powerfully to the right.*
- Connect the ground clamp
Attach the ground clamp to the workpiece with the highest possible clamping force.*
- Connect the stud welding gun with stud welding unit
Connect the welding power cable and then connect the control cable. - Connect the welding power cable
Now plug the welding power cable into the suitable plug connection of the stud welder. Press the plug and turn it powerfully to the right.*
- Connect the control cable
Plug the control cable into the matching plug connection of the stud welder and turn the union nut of the control cable plug to the right.*
- Welding in battery mode
- Switching on the stud welding unit
Press the "On" key to switch on the stud welding unit. - Determining the charging voltage
The charging voltage at the stud welder is first adjusted via the related stud diameter keys. Depending on the material or surfaces, the charging voltage can be adjusted by fine tuning. - Welding
*Only loosely inserted connections will cause damage to the plug connections. Therefore, always check the tightness of the plug connection.
Note: The target group of these video instructions are specialists who, due to their technical training, knowledge and experience as well as knowledge of the relevant regulations, are able to assess the work assigned to them and recognize possible dangers.
This video does not replace operating manual.