CDMi 2402

Capacitor discharge (CD)
Mild steel Stainless steel Brass Aluminium
M3 to M8 (M10) - #4 to 5/16" (7/16")

Description

Application

  • Especially suitable for thin sheets (at least 0.5 mm)

Features

  • Microcontroller
  • Function monitoring
  • Display of error codes
  • Library function
  • Process monitoring
  • Rs232 interface

Safety

  • Integrated mains filter
  • Optimal for construction sites with large mains voltage fluctuations
  • EMC test
  • High-voltage test with log
  • Retriggering lock
  • Thermal monitoring of transformer and internal temperature of stud welding unit
  • Temperature-regulated ventilator
  • Control unit galvanically seperated from welding lines
  • Optimal protection against external interferences
Cdmi2402 Re Display Bearbeitet
Welding range M3 to M8 (M10 limited), dia. 2 to 8 mm (dia. 10 mm limited) #4 to 5/16“ (7/16“ limited) , dia. 14 ga to 5/16‘‘ (dia. 3/8“ limited)
Welding rate M3 / #4 = 40 studs/min. (voltage 60 V) M8 / 5/16“ = 21 studs/min. (voltage 170 V) (M10 / 7/16“ = 17 studs/min. (voltage 210 V))
Capacitance 99 000 μF/33 000 μF with change over of capacitors
Welding time 1 to 3 ms
Energy 2 400 Ws/800 Ws with change over of capacitors
Charging voltage 50 to 220 V (stepless voltage regulation)
Primary power 230 V**, 50/60 Hz, 10 AT (slow blow) **alternative primary power see „Order No.“
Connected load 1000 VA
Power source Capacitor
Cooling type F (temperature controlled cooling fan)
IP Code IP 21
Dimension LxWxH (without handle) 570 x 285 x 290 mm / 22.44“ x 11.22“ x 11.42“
Weight 26 kg / 57.32 lbs
Suitable guns/heads PAH-1, KAH 412, KAH 412 LA
Order No. 92-10-22412B (230 V) 92-12-22412B (115 V)

Suitable stud welding guns:

9420028 Pic 4C Rechts

PAH-1 (centering device dia. 30 mm)

Used for welding with templates Hand gun for fully automatic stud feed (with VBZ-3) or hand feed Recommended for large-scale production
Learn more
M3 to M8
9420025 Pic 4C Rechts

PAH-1 (Tripod)

Universal design for flat surfaces Hand gun for fully automatic stud feed (with VBZ-3) or hand feed Recommended for large-scale production
Learn more
M3 to M8
Ca08 Re

CA 08 with foot ring

Universal design for use on flat surfaces. Used to avoid rear side marking on thin sheets. Aluminium to M6 (1/4“). Brass to M4 (#8).
Learn more
M3 to M8 (M10) - #4 to 5/16“ (7/16“)
9220285_pic_4c_rechts

CA 08 with centering tube PPR-2/CD

Used for welding with templates and for protection against spatter. Gap gun used to avoid rear side marking on thin sheets. Aluminum to M6 (1/4“). Brass to M4 (#8).
Learn more
M3 to M8 (M10) - #4 to 5/16“ (7/16“)
9220286_pic_4c_rechts_LQ

C 08 with centering tube PPR-2

Used for welding with templates and for protection against spatter. All-rounder also used for welding galvanised base material. Aluminium to M4 (#8).
Learn more
M3 to M8 (M10) - #4 to 5/16“
9220256_pic_4c_rechts

C 08 with foot ring

Universal design for use on flat surfaces. All-rounder also used for welding galvanised base material. Aluminium to M4 (#8).
Learn more
M3 to M8 (M10) - #4 to 5/16“